Acta Mesures, Resistivity : accessories : TEST AFF

:: Resistivity

TEST-AFF

Range	0.01MΩ up to 18 MΩ
Accuracy	2% of full scale
Calibration	Manual in one point
Display	LCD display 2 digits Dsplay in MΩ
Probe	Coef. 0.1 Stainless 1m wire
Battery type/life	1x9V / 50 H (provided)
Environment	0 up to 50°C; RH 95%
Enclosure	ABS
Connection	BNC
Dimensions	131 x 58 x 30 mm
Weight	100g

General features

Specially developed for the qualitative control of stocked or in laboratory fluids, the « TEST-AFF-R » controller is the essential complement for the demineralising machine.

If measurement is higher than 18M?, the value «18 » will blink on display.
An LCD display with 2 digits assures a direct measurement reading.

A stainless coaxial probe with one meter of wire is provided with the «TEST-AFF-R ».
All units are factory calibrated with their own cable. However, it is possible to adjust the measurement using the potentiometer inside the tester.

Applications

Water treatment
Demineralised water control

Accessories

RE0.1 AFF - Calibration resistance 100KΩ
RE1 AFF - Calibration resistance 1MΩ
RE5 AFF - Calibration resistance 5MΩ

Order references

TEST-AFF - Portable resistivity controller provided with :
A stainless coaxial resistivity probe with 1m wire
Instructions
9V battery

Top