The portable « RC180 » is an instrument entirely numerical. It allows conductivity or resistivity measurement according to the range. A PT100 integrated in the probe allows the reading and compensation of the temperature on all the ranges. It is possible to use it in automatic compensation from 0 to 80°C but also in manual with the temperature parameter setting (temperature by defect: 20°C). Access to the different parameters (Siemens, Ohms, C°) is possible by simple pressure on the keyboard. The large LCD display allows seeing easily the measurements in all circumstances.
Calibration can be done by manual setting on calibration solutions on all ranges or automatic calibration recall.
For the range 0-2mS/0-20Mo, measure can be displayed in conductivity (0.05µS) or resisitivity (18.2M?).
The instrument is delivered without its probe in order to give choice according to each customer installation.

• Water treatment
• Reverse osmosis
• Surface treatment
• Chemical treatment of used, industrial waters
• Laboratories

• 2R22G1 - Probe range 0-2mS/0-20m? (1m moulded cable)
• 2R22G2 - Probe range 0-20mS (1m moulded cable)
• 2R22G3 - Probe range 0-200mS (1m moulded cable)
• CS24/CS84/CS1413/CS5000 - Calibration solutions
• MAL180 - Box

• RC180 - Conductivity/resistivity controller «portable » (delivered with battery and instructions)