Acta Mesures, osmosis control : OSM2 C

:: Osmosis control

OSM2-C

Range	0-50µS
Accuracy	1% of full scale
Display	5 digits display
Cycle	Attempt – Production
Inputs	4 TOR contact inputs Low level (softener in series) High level (softener in parallel) Water missing Conductivity measurements
Outputs	Pump: control in 380 Volts Tri Admission valve in 24 volts 10 VA Dry alarm contact (3A 220V)
Power	380 Volts Tri
Powering	On/Off
Temperature	-10 °C to +55 °C
Enclosure	Wall mounting with IP65 door 300x200x180
Connection	Cable gland and terminal block

General features

The « OSM2-C» does two main operations: Attempt and production. Passage of a state of production to the other can be either MANUAL or AUTOMATIC according to the user.

ATTEMPT: Conductivity display, no control, all outputs are resting.
PRODUCTION: Conductivity display, active outputs, admission valve, pump, control of water missing and thermal.

Two alarms are controlled by the instrument: « water missing and pump thermal ». They are showed by a red light in front of the instrument. An alarm relay, potential free, is available on the terminal block.
Conductivity measurement controls produced water. It is always displayed.

Application fields

Water treatment
Inverse osmosis

Accessory

1R39 COSSE - Conductivity probe ½’’

Order reference

OSM2 C - Wall mounting osmosis controller

Top