Acta Mesures, osmosis control : ACTA OSM 1

:: Osmosis control

OSM1

Range	0-1000µS or 0-100µS
Conductivity probes	Two probes K=0.3 with 1m cable
Accuracy	1% of full scale
Display	LCD display 2x16 digits
Setting	10 pads keyboard
Cycle	Attempt-Production-Rinsing-Washing
Divers	Pump counting Divers stop 6 galvanic insulated entries 4 contact outputs 1 alarms/1 default led
Battery type/life	max.250 V AC / 3A / 500 VA
Power	220V 50 hz /24 VAC and 115 on request
Electrical consumption	10 VA
Temperature	-10 °C to +55 °C
Enclosure	Wall mounting with IP65 door (L235,H150,P110mm) Panel mounting without IP54 door (P54 187x138mm)
Connection	Cable gland (wall mounting version) Terminal block (panel mounting version)

General features

Automats «OSM1» permit regulation of osmosis in production. With both integrated conductivity measurements, softened water measurements and osmosis water can always be read on screen.
Totally controlled by microprocessors, this instrument do the following cycle : Attempt-Production-Rinsing-Washing. Washing function is done according to user’s registered setting. (Setting with the keyboard).
A default led informs of the dysfunction in the instrument. A simple lecture on the screen shows the type of default.
6 galvanic insulated TOR contact inputs for : mini level/max level/overpressure/water missing/concentred/free.
5 relay outputs for: pump/admission/washing/rinsing/alarm.
Setting of the instrument done, it is possible to stop the keyboard to avoid that someone changes it.
Two probes are delivered with the instrument.

Application fields

Water treatment
Inverse osmosis

Accessoires

IP65-144 - Waterproofed IP65 door for panel mounting enclosure.

Order references

OSM1 C - Wall mounting osmosis control
OSM1 E - Panel mounting osmosis control

Top