Acta Mesures, conductivity : TEST AFF C

:: Conductivity

TEST-AFF-C

Range	0-99 µS
Accuracy	1 µS
Calibration	Manual in one point
Display	Afficheur à cristaux liquides 2 digits affichage en µS
Probe	Coef. 0.1 Stainless 1m wire
Battery type/life	1 battery 9V / 50H (provided)
Environnement	0 à 50°C ; RH 95%
Enclosure	ABS
Raccordement	BNC
Dimensions	131 x 58 x 30 mm
Weight	100g

General features

pecially developed for the qualitative control of stocked or in laboratory fluids, the « TEST-AFF-C » controller is the essential complement for the osmosis machine.

If measurement is higher than 99µS, the value « 99 » will blink on display.
An LCD display with 2 digits assures a direct measurement reading.

A stainless coaxial probe with one meter of wire is provided with the «TEST-AFF-C ».
All units are factory calibrated with their own cable. However, it is possible to adjust the measurement using the potentiometer inside the tester.

Applications

Water treatment
Osmosis water control

Accessories

CE0.1 AFF - Calibration resistance 10µS
CE0.2 AFF - Calibration resistance 20µS
CS84 - Calibration solution 84µS

Order references

TEST-AFF-C - Portable Conductivity controller with :
A stainless coaxial conductivity probe with 1m wire
Instructions
9V battery

Top